Technical Specifications

Model name: Pelton turbine trainer (PTT)

Water delivery & storage Hydraulic Bench (HB): – HB: 2HP delta 230VAC monoblock pump with 1Ph I/P to 3Ph O/P VFD drive, – Inlet: 2″(50mm), Outlet: 1.5″ (37.5mm) 8000LPH rotameter to measure water flow Bypass & flow control ball valves

 Piping: UPVC (1.5″), Elbow: UPVC (1.5″x2nos), Union: UPVC (1.5″).

Turbine Runner: Pelton turbine hub carries 18 buckets on horizontal shaft (194) supported on 2 nos plummer blocks mounted on chassis placed on HB holding tray emptying into sump tank.
Speed Measurement: Hand held tachometer for RPM measurement.
Gauges, Meters, Sensors etc.:On HB: Oil filled, 0-8 Bar, 2.5″ dial size, 1/4″ port pressure gauge.
Loading: Brake pulley loading OR 1HP BLDC generator (optional) mounted on chassis coupled to pelton shaft.
Control panel rack: Table top 4×2 aluminum profile (45×45) rack to mount resource panels viz. 1 Phase AC input supply panel (EMT16), VFD drive for pump motor (EMT33), VFD: 1 phase I/P & 3 phase 230VAC delta O/P, Multifunction 3 Phase meter panel (EMT34).

Model name: Kaplan turbine trainer (KTT)

Water delivery & storage Hydraulic Bench (HB):– HB: 2HP delta 230VAC monoblock pump with 1Ph I/P to 3Ph O/P VFD drive, – Inlet: 2″(50mm), Outlet: 1.5″ (37.5mm) -8000LPH rotameter to measure water flow, – Flow control ball valve.

Piping: Piping: UPVC (1.5″), Elbow: UPVC (1.5″x2nos), FTA: UPVC (1.5″), Adaptor: UPVC (1.5″) Bush: UPVC (1.5″ to 3/4″), Bush: UPVC (3/4″ to 1/2″ threading), Brass nozzle (1.5″x2nos), Reinforced flexible plastic pipe: 1.5″ x 1meter, Brass nozzle: 10mm.

Enclosure: SS casing with transparent perspex cover to facilitate observation of rotating parts.

Turbine Runner: 7 blade runner as shown above is hanging inside cavity of SS casing inserted in HB using 150 shaft mounted in 30×30 aluminum profile structure using 15 bearings x 2nos.

Speed Measurement: Hand held tachometer for RPM measurement.
Gauges, Meters, Sensors etc.:On HB: Oil filled, 0-8 Bar, 2.5″ dial size, 1/4″ port pressure gauge.

Model name: Francis turbine trainer (FTT)

Water delivery & storage Hydraulic Bench (HB):– HB: 2HP delta 230VAC monoblock pump with 1Ph I/P to 3Ph O/P VFD drive, – Inlet: 2″(50mm), Outlet: 1.5″ (37.5mm) -8000LPH rotameter to measure water flow, – Flow control ball valve.

Piping: Piping: UPVC (1.5″), Elbow: UPVC (1.5″x2nos), FTA: UPVC (1.5″), Adaptor: UPVC (1.5″) Bush: UPVC (1.5″ to 3/4″), Bush: UPVC (3/4″ to 1/2″ threading), Brass nozzle (1.5″x2nos), Reinforced flexible plastic pipe: 1.5″ x 1meter, Brass nozzle: 10mm.

Enclosure: SS casing with transparent perspex cover to facilitate observation of rotating parts.

Turbine Runner: 7 blade runner as shown above is hanging inside cavity of SS casing inserted in HB using 150 shaft mounted in 30×30 aluminum profile structure using 15 bearings x 2nos.

Speed Measurement: Hand held tachometer for RPM measurement.
Gauges, Meters, Sensors etc.:On HB: Oil filled, 0-8 Bar, 2.5″ dial size, 1/4″ port pressure gauge.