Get In Touch

No products in the cart.

Get In Touch

No products in the cart.

Get In Touch

Function Generator (Model : FG1M/FG2M/FG3M)

The Function Generator Trainer is a versatile and user-friendly tool for calibration, testing, and experimentation in electronic circuits. The function selection is facilitated by SPDT and DPDT switches, ensuring ease of use. The frequency range covers seven ranges, selected through four plus three slide switches, spanning from 1Hz to 1MHz. A bright 4-digit 7-segment LED display provides clear frequency readouts, complemented by range-indicating LEDs for Hz, KHz, and MHz. Frequency range selection is made easy with a separate fine control. The trainer supports various waveform options, including sine, triangle, square, ramp, pulse, and TTL. Switched faults and test points are incorporated for diagnostic purposes. It features variable DC offset control with offset enable.

Category:

Function Generator Trainer:

  • Function selection using SPDT & DPDT switches.
  • Frequency range : 7 Ranges selected using 4+3 slide switches from 1Hz to 1MHz.
  • Bright 4 digit 7 segment LED display for frequency readout with range indicating LEDs Hz, KHz & MHZ.
  • Easy selection of frequency range with separate fine control.
  • Versatile waveforms options: Sine, Triangle, Square, Ramp, Pulse, TTL etc.
  • Switched Faults & test points provided.
  • DC offset control variable with offset enable. u 50W outputs with step attenuator of maximum 20dB / 40dB / Variable up to -75 db.
  • Useful for testing and measurement in the laboratory and on the field.
  • Designed to provide good quality signal while maintaining easy operability

Technical Specifications

FG1M/2M/3M (with uC based counter)-3 Models:

Frequency Range:0.01Hz to 1MHz, 0.02Hz to 2MHz, 0.03Hz to 3MHz.

Range Selection:7 step switch with separate fine control

Waveforms: Sine, Square, Triangle, TTL

Frequency Display: 4 Digit 7 Segment Display

Amplitude Display: Yes

Sine Wave Distortion: < 1% typical < 100KHz, 3% >100KHz

Square wave Rise & Fall time: Less than 100ns

FG1M/2M/3M (without counter)-3 Models:

Frequency Range:0.1Hz to 1/2/3MHz

Range Selection:7/8 step switch with separate fine control

Waveforms: Sine, Square, Triangle, TTL / CMOS, PWM / Pulse O/P using duty cycle control. Skewed Sine/Triangle(Optional) DC Level.

Frequency Display: Display with accuracy within +1% up to 100KHz &
3%FS@ 1MHz, range LEDs for MHz, KHz and Hz

Amplitude Display: Display in Volts peak-peak with accuracy within +3% @ 30Vpp, LEDs to indicate V, > 30V overdrive LED.

Sine Wave Distortion: < 1% typical < 100KHz, 3% >100KHz

Square wave Rise & Fall time: Less than 70 ns@ 1MHz

 

 

Reviews

There are no reviews yet.

Be the first to review “Function Generator (Model : FG1M/FG2M/FG3M)”

Your email address will not be published. Required fields are marked *

Related Products

× How can I help you?