Get In Touch

Microprocessor/Microcontroller Trainer(Model : XPO-KIT)

The XPO-KIT is a trainer for microprocessors and microcontrollers. It helps you learn to program and troubleshoot these devices through:

  • User-friendly design: Sturdy plastic case and standard keyboard programming.
  • Hardware focus: On-board fault links simulate real-world problems for practice.
  • Protected components: Acrylic cover shields delicate ICs.
  • Versatile connectivity: Supports both serial and keyboard display connections.
  • Ergonomically injection moulded Plastic enclosure.
  • Use of standard PC 101/PS2 Keyboard for programming.
  • Emphasis on Hardware troubleshooting through on board short links.
  • Exhaustive Didactic Courseware.
  • Critical & delicate ICs are protected under acrylic cover from below.
  • All in one Logical IO Monitor design Supports both serial IO & Keyboard
    display console IO.x

Technical Specifications

User Manual:

  • Student Workbook
  • Instructor Guide and Technical Reference
  • Optionally Lab Exercise Book common for 85,
    86 & 51.

Speed: 20 MHz crystal operated multi-output clock source to operate various resources on Mother Board like CPU, Baud rate,
T/C etc.
Parallel I/O: 48 I/O lines using two 8255 through 2 Nos. of 26 pin FRC header, printer I/F.
Serial I/O: RS-232c serial interface using 8251 and RS232 driver IC through 9 Pin male D connector.
Timer counter: 3 Nos. T/C using 8253 pins brought out on 6 pin reliamate.
Display(Choose one option):

  • 16 X 2 LCD (Backlit)
  • 16 X 2 Jumbo LCD (Backlit)
  • 20 X 4 LCD (Backlit)
  • 40 X 2 LCD (Backlit)

Key Board: Single chip micro- controller 89C2051 to support 101Keys PC AT / PS2 Keyboard and LCD
System Bus: 50 Pin FRC buffered Bus to connect periware cards as well as to facilitate ROM Emulation of 8 bit/16bit system memory using external ROM emulation card cum converter card.
Battery Backup: Rechargeable NiCd battery (3.6/60maH) provided to supply power to battery backup memory and Optional RTC 58167.
Onboard Features:

  • External Loud Speaker (8ohm/0.5W) interface for experiments on frequency synthesis.
  • Reset and Single Step/Interrupt push button.
  • EP socket for experiments with Cassette recorder interface.
  • Programmable Wait state generator l Real Time Clock IC 58167 (Optional)
  • 11 Nos. fault links to teach troubleshooting skills by introducing faults in the circuit.
  • PALs-All glue logic like Memory I/O decoders are implemented using 4(5) nos. of EEPROM PALs 16V8

Power Supply (SMPS) Select one of 2 options:

  • 5V /2.5 Amp SMPS with RCA plug. (Only for Kit)
  • 5V /2.5 Amp SMPS with RCA plug +12 V/ 850 mA , -12V/250 mA with 4 pin reliamate SMPS.

Mechanical Details: Aesthetically designed Injection molded plastic enclosure of size 215(L)X165(W) X 75(H) mm. Weight = 900 gm.(1.5 Kg with manuals)

  • Shorts 2 Pins of Address Bus.
  • Shorts 2 Pins of Data Bus.
  • Shorts Address pin to Data Bus.
  • Increasing Battery Discharge.
  • Disables RD/ & WR/ into BBK RAM
  • Permanent Wait State.
  • Disables 7 Segment Scanning.
  • Disables 7 Segment Data.
  • Permanent Reset State.
  • Stops 20MHz Clock.
  • Disables Baud Rate Clock.

Cables & CD

9 Pin Female to 9 Pin Female RS-232c Cable, 26 Pin FRC IO Cable, Centronics Interface cable (26 pin FRC to 36 pin
Centronics female), USB to RS232 Cable (using Cp2102), Sample program & Software on CD .

Reviews

There are no reviews yet.

Be the first to review “Microprocessor/Microcontroller Trainer(Model : XPO-KIT)”

Your email address will not be published. Required fields are marked *

× How can I help you?